Zimmer Biomet could pay millions after two hip implant lawsuit losses - MassDevice

Zimmer Biomet logoA federal judge in Missouri has signed off on a $21 million judgment against Zimmer Biomet  (NYSE:ZBH) involving the company’s much-litigated M2a Magnum metal-on-metal hip implant.

U.S. District Judge Stephen R. Clark’s sign-off yesterday of the award — $20 million to Mary Bayes and $1 million to her husband Philip Bayes — came a day after a federal jury in Iowa awarded $3.55 million to Lori Nicholson and her husband Willis for injuries sustained as a result of the M2A Magnum.

Zimmer Biomet in statements shared via email to MassDevice said that company officials were “disappointed in the inconsistent jury verdict” in the Missouri case and that the Iowa jury’s verdict was “contrary to the evidence presented at trial.”

The company plans to appeal both cases. “The M2a hip implant has helped thousands of patients successfully regain their mobility. … Our commitment to patient safety, quality, and integrity shapes every decision that we make, and we will continue to strive for our mission of alleviating pain and improving quality of life for people around the world.”

Metal-on-metal implants have been one of the notable medical device industry failures of the early 21st century. The hip implants were supposed to be stronger and more durable, but they instead were plagued by higher failure rates and potential exposure to toxins from metal particles released by friction.

The FDA in 2016 no FDA-approved metal-on-metal total hip replacement devices marketed in the U.S.

Many of the lawsuits involving Zimmer Biomet’s M2a have been consolidated into multi-district litigation in federal court in Northern Indiana.

RSS From Medical Design & Outsourcing

  • The best places to work for medtech sales reps
    Teleflex (NYSE:TFX), ConMed (NSDQ:CNMD) and orthopedic fixation company Acumed top the list of best places to work in medtech sales in the coming year, according to a MedReps.com survey of medical sales representatives. The 10th annual MedReps survey polled more than 2,000 medical sales professionals in October 2020 to get a better understanding of what employees look for… […]
  • Researchers tout probes for validating rapid COVID-19 tests
    Nanoengineers at the University of California San Diego have developed probes that they say could make validating rapid, point-of-care COVID-19 tests easier. The probes, called “positive controls,” are made from virus-like particles and are stable and easy to manufacture, according to a news release. The researchers at UCSD believe the positive controls can improve the… […]
  • How ResMed is advancing sleep and respiratory care
    The COVID-19 pandemic’s propulsion of widespread telehealth adoption has ResMed (NYSE:RMD) eyeing remote technologies for the next phase of its sleep and respiratory businesses. The president of that business for the San Diego-based company, Jim Hollingshead, told Medical Design & Outsourcing in a recent interview that the future lies with remote care and digital health offerings. “Right… […]
  • Stricter Documentation Requirements Pose New Challenges for Medical Device Manufacturers
    By Maurizio Lauria, Brand Manager, STEUTE Meditech Inc. New European guidelines and standards have greatly increased the testing and documentation required in order to introduce a new medical device, making the process even more complex and time-consuming for medical device manufacturers. Additionally, these standards apply not only to the device itself but the user interface,… […]
  • Tips to help bring your medical device from mind to market
    By Bret Ludwig, Ph.D. Senior Product Development Specialist, 3M Medical Materials & Technologies Great medical devices start with an idea—a spark. And from there, it might move to the back of a napkin or a notepad. But as development continues, the process can get trickier and more complex. In fact, turning an idea into a… […]
  • FDA allows dry heat treatment for single-user mask reuse
    The FDA has announced that it will allow the use of dry heat to lower the bioburden on masks used by healthcare workers treating COVID-19 patients. While not izing equipment made by a particular company, guidance released last week said healthcare providers may use dry heat to reprocess NIOSH-approved filtering facepiece respirators, such as N95s,… […]
  • Mass General researchers tout low-cost, portable brain imaging scanner
    Researchers at Massachusetts General Hospital are touting a low-cost, portable “head only” MRI scanner that could be used in multiple settings. As opposed to standard costly, immobile MRI scanners that require special infrastructure, the MGH researchers developed a low-cost, compact, portable and low-power scanner that could be mounted in an ambulance, wheeled into a patient’s… […]
  • HHS confirms involvement in presidential transition process
    U.S. Health and Human Services Dept. Secretary Alex Azar confirmed that HHS is working with president-elect Joe Biden on a presidential transition. Speaking during a press briefing, Azar said HHS is in contact with the transition team after the General Services Administration formally recognized Biden as the president-elect, having previously sidestepped questions regarding the potential… […]
  • Swiss scientists make ‘micromachines’ for self-deploying stents and more
    Researchers in Zurich reported today that they have invented a manufacturing technique to build “micromachines” out of metal and plastic in which these two materials are interlocked as closely as links in a chain. These robots are so tiny that they can maneuver through blood vessels and deliver medications to certain points in the body… […]
  • This AI algorithm could detect COVID-19 in chest X-rays
    Northwestern University researchers are touting a new AI platform that can detect COVID-19 in X-ray images of the lungs. DeepCOVID-XR, a machine-learning algorithm, performed better than a team of specialized thoracic radiologists by spotting COVID-19 in X-rays about 10 times faster and 1%-6% more accurately, according to a news release. Researchers involved think physicians could… […]
  • Aspen Surgical acquires Protek Medical Products
    Disposable products maker Aspen Surgical Products today announced the acquisition of Protek Medical Products (Coralville, Iowa). Protek manufactures single-use ultrasonic probe covers and needle guides used in tissue biopsies, fluid aspiration, and vascular access procedures as well as protective covers for medical instruments and equipment. The acquisition of Protek strengthens Aspen’s portfolio of medical, patient… […]

Reader Interactions

Leave a Reply Cancel reply